Thickness control
Nominal sheet thickness is not a promise of precision shim thickness. Mark controlled thickness and discuss any required finishing.
Custom Laser-cut Slotted Shims
Open-slot shim profiles that can be positioned around a fastener during alignment. Specify the slot opening and thickness for your assembly; thickness-critical applications may require a different material condition or finishing route.
Laser cutting · Deburring · CNC features as specified
Application examplesMachine alignment · Mounting adjustment · Assembly spacing
Slotted Shims: dimensions and quotation parameters.
The dimensions below help us review slotted shims. State units and critical tolerances on the original drawing. The illustration explains the type of geometry; it does not define a standard size.
| Slot opening | Dimension the open slot width, depth and end radius. |
|---|---|
| Outer envelope | Give length, width and corner geometry. |
| Shim thickness | Provide required thickness, thickness tolerance and stack arrangement if applicable. |
| Contact face | Identify surfaces that control alignment and any flatness requirement. |
| Material & quantity | Give the exact metal grade, standard, temper or condition, quantity per revision and planned repeat orders. |
| Units & tolerances | Use mm or inches consistently. Mark the dimensions that control fit and the inspection datum. |
Thickness range, minimum features, tolerances, finish availability and delivery date are reviewed for your actual part. No catalog dimension or blanket machining tolerance is implied.
What we review
before cutting.
Cut contours, hole function and the way the plate meets its mating parts.
Installation clearance
Show fastener size and clearance so the open slot fits the intended installation method.
Material and finish
belong in the drawing.
Grade, environment and visible-face requirements are separate specification choices. Include them before quotation so the material and process route can be reviewed together.
Specify the grade
Stainless steel options include 304, 304L, 316, 316L, 430 and duplex 2205. Carbon steel, galvanized steel, aluminium, copper and brass can also be discussed for your drawing. State the exact grade and applicable material standard.
Read the grade selection reference for general material context. Availability, product form and suitability are confirmed for the project. Explore all six material families.
Define the finished surface
Identify a mill finish, brushed appearance or another specified finish; include the visible face, grain direction and any surface-roughness requirement.
Specify edge deburring, protective-film handling and packing if they affect the delivered part. Read the finish terminology guide.
Material options are reviewed against your drawing, grade, thickness and finishing needs. Stainless steel remains our core focus; sourcing and the manufacturing route are confirmed during quotation.
Inspect the features
that matter to your assembly.
Check slot size and depth, outside dimensions and specified thickness. Inspect flatness where the approved drawing requires it.
Provide the inspection datum, critical dimensions and any requested records with the inquiry. A model preview supports communication; the approved engineering drawing remains the manufacturing reference.
Quality & material requirementsSlotted Shims:
common questions.
Can I request mixed thickness sets?
List each thickness and quantity separately, with the required thickness tolerance and identification or packing requirements.
What should I send for a quotation?
Send your slotted shims drawing, grade, thickness or tube section, quantity, finish and critical dimensions. A clear PDF or image is accepted for review; a DXF supports flat cutting contours.
Can I request prototypes and production batches?
Include prototype quantity and expected repeat quantity in the inquiry. Batch size, process route and lead time are confirmed after the drawing and specification review.
Send your slotted shims drawing.
Send the file and procurement requirements. No customer account is needed.
Upload & Request a Quote- Drawing number, revision and units
- Material grade and sheet or wall thickness
- Quantity, finish and critical dimensions
- Destination and requested delivery date
Related flat parts.
Compare the geometry and drawing requirements.
Weld-on Tabs
Custom flat tabs used as mounting or locating features on welded assemblies.
Part details & dimensions
Backing Plates
Made-to-drawing backing plates that sit behind mounting surfaces to distribute contact or provide a defined fixing interface.
Part details & dimensions
Perforated Screens
Custom sheet panels with repeated holes or slots for guards, ventilation or application-specific screens.
Part details & dimensionsPrepare your quotation request.
Drawing checklist and custom laser cutting quotation factors. Thin shim thickness, flatness and edge requirements.