Washer function
Clarify whether the part only spaces components or carries a defined load; cutting a profile does not establish mechanical performance.
Custom Laser-cut Metal Washers
Circular or shaped washers cut to a specified outside profile and bolt clearance. These are made-to-drawing parts; load-bearing properties and compliance with a washer standard require separate confirmation.
Laser cutting · Deburring · CNC features as specified
Application examplesFastener spacing · Assembly interfaces · Equipment mounting
Custom Washers: dimensions and quotation parameters.
The dimensions below help us review custom washers. State units and critical tolerances on the original drawing. The illustration explains the type of geometry; it does not define a standard size.
| Outside profile | Specify outside diameter or a dimensioned non-circular outline. |
|---|---|
| Bore diameter | Show bolt clearance and any position tolerance relative to the outside profile. |
| Thickness | State nominal sheet thickness and whether the washer needs ground or machined faces. |
| Edge condition | Define burr direction restrictions and required edge break. |
| Material & quantity | Give the exact metal grade, standard, temper or condition, quantity per revision and planned repeat orders. |
| Units & tolerances | Use mm or inches consistently. Mark the dimensions that control fit and the inspection datum. |
Thickness range, minimum features, tolerances, finish availability and delivery date are reviewed for your actual part. No catalog dimension or blanket machining tolerance is implied.
What we review
before cutting.
Cut contours, hole function and the way the plate meets its mating parts.
Standard requirements
If replacing a standard washer, provide the standard and mechanical requirements rather than only its dimensions.
Material and finish
belong in the drawing.
Grade, environment and visible-face requirements are separate specification choices. Include them before quotation so the material and process route can be reviewed together.
Specify the grade
Stainless steel options include 304, 304L, 316, 316L, 430 and duplex 2205. Carbon steel, galvanized steel, aluminium, copper and brass can also be discussed for your drawing. State the exact grade and applicable material standard.
Read the grade selection reference for general material context. Availability, product form and suitability are confirmed for the project. Explore all six material families.
Define the finished surface
Identify a mill finish, brushed appearance or another specified finish; include the visible face, grain direction and any surface-roughness requirement.
Specify edge deburring, protective-film handling and packing if they affect the delivered part. Read the finish terminology guide.
Material options are reviewed against your drawing, grade, thickness and finishing needs. Stainless steel remains our core focus; sourcing and the manufacturing route are confirmed during quotation.
Inspect the features
that matter to your assembly.
Measure outside size, bore and thickness. Review flatness, edge condition and any requested material identification.
Provide the inspection datum, critical dimensions and any requested records with the inquiry. A model preview supports communication; the approved engineering drawing remains the manufacturing reference.
Quality & material requirementsCustom Washers:
common questions.
Can I order non-round washers?
Yes. Provide the custom outer profile, bore position and mating-part requirements. Performance requirements must be stated separately.
What should I send for a quotation?
Send your custom washers drawing, grade, thickness or tube section, quantity, finish and critical dimensions. A clear PDF or image is accepted for review; a DXF supports flat cutting contours.
Can I request prototypes and production batches?
Include prototype quantity and expected repeat quantity in the inquiry. Batch size, process route and lead time are confirmed after the drawing and specification review.
Send your custom washers drawing.
Send the file and procurement requirements. No customer account is needed.
Upload & Request a Quote- Drawing number, revision and units
- Material grade and sheet or wall thickness
- Quantity, finish and critical dimensions
- Destination and requested delivery date
Related flat parts.
Compare the geometry and drawing requirements.
Metal Gasket Blanks
Flat metal blanks with gasket-shaped outlines and bolt patterns for further processing or application-specific assembly.
Part details & dimensions
Slotted Shims
Open-slot shim profiles that can be positioned around a fastener during alignment.
Part details & dimensions
Weld-on Tabs
Custom flat tabs used as mounting or locating features on welded assemblies.
Part details & dimensionsPrepare your quotation request.
Drawing checklist and custom laser cutting quotation factors.